2020 Haro Lineage Sport Bashguard

The 2020 Haro Lineage Sport Bashguard is a reissue of the 1990 Haro Sport Bashguard.

Purchased as a frame from Planet BMX in November 2021 for $499.This is my 5th bike I picked up in 2021 after not riding since 1991. I never pulled the trigger on a bashguard bike in 1990, and with these available again 30 years later, I just couldn't say no twice. This is a custom build with a parts list very close to the complete bike, but using black parts instead of silver wherever possible. The front end Lineage parts came from my previous daily rider, the 2021 Haro Interstate, which is now sold.Description from Haro's web site (modified with minor corrections):Lineage Sport Bashguard
Year: 2020
MSRP: $1,609.99 *
Sizes: 20.5", 21"
Colors: Neon Green, Black
Weight: XX.X lbs (not listed)
Weight: 31.4 lbs (as weighed by me)
 
 
The Lineage Sport Bashguard was created to take a DNA strand or two from our past and thread it into state of the art contemporary designs of the present. Look at this masterpiece, from a glance its difficult to tell from the original 30 years prior. But when you look closely, you will see all modern technology. Investment cast dropouts, Mid BB, internal headset. Forks are full CNC heat treated and butted same as the Kneesaver bars and alloy 22mm cranks. This bike is as high level BMX you are going to buy in todays market.
 
FEATURES
  * 100% chromoly Lineage Sport frame with platform, hour glass Mid BB shell, integrated head tube and Lineage cast dropouts with integrated chain tensioners
* 100% heat treated chromoly Lineage fork with CNC 1 piece internal threaded steer tube, integrated bearing race, tapered legs, investment cast dropouts and 990 brake mounts with internal brake cable routing
* 100% heat treated and butted chromoly Lineage Kneesaver bars 8.5" with Haro Lineage CNC alloy top load stem
* Lineage heat treated 3-piece alloy 175mm cranks with Haro Lineage Compact Disc 28T CNC alloy bolt drive sprocket and sealed Mid BB
* 36/13 gearing
* Fully sealed wheels with Lineage high flange hubs and double-wall alloy rims
* Haro HPF 100 psi tires 20 x 2.2" front and rear
* Haro Fusion Stealth Pivotal seat with alloy Lineage Pivotal fluted post
* Haro Fusion pedals
* CNC alloy pegs
* CNC alloy gyro with Teflon bearing
* Haro Team grips
* KMC K710SL super light chain
* Dia-Compe "Hombre" FS996 brakes with Tech 77 levers front and rear
* Haro Lineage alloy seat post clamp
* 100 Black, 150 Green models produced
   
FRAME FEATURES
  * 100% 4130 chromoly construction with heat treated HT/BB/DO/CS
* Integrated HT with Mid BB shell and tapered chain stays
* Platform wishbone top tube, butted down tube and externally CNC machined seat tube
* 8mm investment cast Lineage dropouts with integrated axle tensioner hardware
* Geometry - 11.5" BB, 14.25" RC, 75 HT angle, 71 ST angle, 9" SO
* 7.3 lbs
CUSTOM PARTS (that differ from the complete bike parts list)Haro 2020 Lineage Sport Bashguard decal set (to replace the bars and fork decals)Haro Baseline seat post, 200 mmHaro SD plastic pedalsShadow Conspiracy Deadbolt bar endsTotal BMX Chaos gyroOdyssey Ghost clear brake padsGT Real Steel pegsMission Chromoly hub guards on frontGSport Uniguard hub guards on rear

View Bike In Museum